{"product_id":"victron-multi-rs-solar-48-6000-100-450-100-2-tracker-pn-pmr482602020","title":"Victron Multi RS Solar 48\/6000\/100-450\/100 2 Tracker PN: PMR482602020","description":"\u003cp class=\"MsoNormal\"\u003e\u003cspan\u003eThe Multi RS Solar is a combined inverter\/charger and MPPT solar charger.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan\u003eIt is designed to operate with a 48V battery bank and produces a pure AC sine wave at 230V.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan\u003eTwo AC outputs\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan\u003eBesides the usual uninterruptible output (AC-out-1), an auxiliary output (AC-out-2) is available that disconnects its load in the event of battery-only operation. Example: an electric boiler that is allowed to operate only if the AC input is available. There are several applications for AC-out-2.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan\u003ePowerControl - maximum use of limited AC power\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan\u003eThe product can supply a huge charging current. This implies heavy loading of the AC input. Therefore a maximum current can be set. The product then takes other power users into account, and only uses 'surplus' current for charging purposes.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan\u003ePowerAssist - extended use of AC input current\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan\u003eThis feature takes the principle of PowerControl to a further dimension allowing the product to supplement the capacity of the alternative source. Where peak power is often required only for a limited period, the product will make sure that insufficient AC input power is immediately compensated for by power from the battery. When the load reduces, the spare power is used to recharge the battery.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan\u003eThe Multi RS can provide throughput of up to 50 A to the loads. The AC input relays are limited to 50 A (Multi RS - 2 tracker), and the inverter can contribute up to 25 A continuous at best conditions (when it gets hotter this figure will be reduced).\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan\u003eThis power comes from either the battery and\/or the DC PV (the DC PV power also has to go through the inverter before it reaches the AC loads).\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan\u003eProgrammable\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan\u003eAll programmable settings and grid-interactive setpoints for this product can be changed with either a mobile phone or computer (Windows requires VE.Direct to USB dongle), using the free VictronConnect software available on the App Store of your device, or \u003ca href=\"http:\/\/www.victronenergy.com\/\" target=\"_blank\"\u003ewww.victronenergy.com\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan\u003eProgrammable relay\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan\u003eThe product is equipped with a programmable relay. The relay can be programmed for different applications, for example as a starter relay.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan\u003eProgrammable analog\/digital input\/output ports\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan\u003eThe product is equipped with 2 analog\/digital input\/output ports.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan\u003eThese ports can be used for several purposes. One application is communication with the allow-to-charge and allow-to-discharge BMS controls of a lithium-ion battery.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan\u003eSee appendix.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan\u003eBuilt-in Battery Monitor\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan\u003eThe ideal solution when the product is part of a hybrid system (AC input, inverter\/chargers, storage battery, and alternative energy). The built-in battery monitor can be set to open and close the relay:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul type=\"disc\"\u003e\n\u003cli class=\"MsoNormal\"\u003e\u003cspan\u003estart at a preset % discharge level\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"MsoNormal\"\u003e\u003cspan\u003estart (with a preset delay) at a preset battery voltage\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"MsoNormal\"\u003e\u003cspan\u003estart (with a preset delay) at a preset load level\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"MsoNormal\"\u003e\u003cspan\u003estop at a preset battery voltage\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"MsoNormal\"\u003e\u003cspan\u003estop (with a preset delay) after the bulk charge phase has been completed\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"MsoNormal\"\u003e\u003cspan\u003estop (with a preset delay) at a preset load level\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan\u003eHigh efficiency\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003e\u003cspan\u003eOutstanding inverter\/charger efficiency\u003c\/span\u003e\u003c\/b\u003e\u003cspan\u003e - Maximum efficiency of 96%. The inverter is short circuit proof and protected against overheating, whether due to overload or high ambient temperature.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003e\u003cspan\u003eUltra-fast Maximum Power Point Tracking (MPPT)\u003c\/span\u003e\u003c\/b\u003e\u003cspan\u003e - Especially in case of a clouded sky, when light intensity is changing continuously, a fast MPPT algorithm will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003e\u003cspan\u003eAdvanced Maximum Power Point Detection in case of partial shading conditions\u003c\/span\u003e\u003c\/b\u003e\u003cspan\u003e - If partial shading occurs, two or more maximum power points may be present on the power-voltage curve. Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP. The innovative SmartSolar algorithm will always maximize energy harvest by locking to the optimum MPP.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan\u003eFrequency shift function\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan\u003eWhen external PV inverters are connected to the output of the inverter, excess solar energy is used to recharge the batteries. Once the battery absorption voltage is reached, charge current will reduce by shifting the output frequency higher. This frequency shift is automatic and does not require configuration on the Multi RS Solar, though the AC PV inverter may require additional configuration.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan\u003eThis feature is used for battery over charge protection and solar assist.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan\u003eThe Multi RS Solar does not allow complete charging of the battery from an AC PV inverter to fully 100% State of Charge.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan\u003eThat is a safety precaution to prevent overcharging of the battery when the AC PV output cannot be adjusted quickly enough to prevent a system shutdown, so when charging from AC PV, there is some capacity left in the battery remaining to absorb this surplus.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan\u003eTo complete a full charge from solar, connect PV to the internal MPPT solar charger, or another DC MPPT.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan\u003eHigh power inverter\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003e\u003cspan\u003eHigh peak power \u003c\/span\u003e\u003c\/b\u003e\u003cspan\u003e- The inverter is able to supply a maximum AC output power to a peak 9000W or 50A AC, for 3 seconds. This supports smooth operation for motor start up and other demanding surge loads.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003e\u003cspan\u003eContinuous power output, with solar boost\u003c\/span\u003e\u003c\/b\u003e\u003cspan\u003e - Continuous output power at 25C t ambient, at 52VDC, is 5300W. When combined with solar power from the built-in MPPT this increases approximately 10% to 5800W.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003e\u003cspan\u003eIsolated PV connections for additional safety\u003c\/span\u003e\u003c\/b\u003e\u003cspan\u003e - Full galvanic isolation between PV and battery connections provide additional overall system safety.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003e\u003cspan\u003eTemperature Protected\u003c\/span\u003e\u003c\/b\u003e\u003cspan\u003e - Over-temperature protection and power derating when temperature is high.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan\u003eInterfacing and Communications\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003e\u003cspan\u003eVE.Direct port and two VE.Can ports\u003c\/span\u003e\u003c\/b\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan\u003eThe Multi RS Solar only supports a data connection to a GX device (i.e Cerbo GX) via the VE.Can port, and not the VE.Direct port. The VE.Direct port can be used to connect a GlobalLink 520 for remote data monitoring, or USB to VE.Direct dongle for VictronConnect access on a Windows computer.\u003cstrong\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eDevice Display\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eA 4 line LCD back-lit display shows operational information including battery levels, solar yield, and system icons.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eUser I\/O connector:\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e                                                                          \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e·        \u003c\/span\u003e\u003cspan\u003eAux 1, 2 input\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e·        \u003c\/span\u003e\u003cspan\u003eProgrammable relay\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e·        \u003c\/span\u003e\u003cspan\u003eBattery voltage sense (Vsense)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e·        \u003c\/span\u003e\u003cspan\u003eBattery temperature sense (Tsense)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e·        \u003c\/span\u003e\u003cspan\u003eRemote H \u0026amp; Remote L - Configurable\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eBluetooth Smart built-in\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe wireless solution to set-up, monitor and update the controller using Apple and Android smartphones, tablets or other compatible devices.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eConfiguring and monitoring with VictronConnect\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eConfigure with the VictronConnect app. Available for iOS, Android devices, as well as macOS and Windows computers. A VE.Direct to USB accessory is required for Windows systems; enter VictronConnect in the search box on our website and see the VictronConnect download page for details.\u003c\/span\u003e\u003c\/p\u003e","brand":"Victron","offers":[{"title":"Default Title","offer_id":46288389341355,"sku":null,"price":2899.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0543\/7027\/1403\/files\/s-l1600_fb0dd19f-5c1b-4a02-8b93-641622dc6b3c.webp?v=1773053259","url":"https:\/\/edgepower.com.au\/products\/victron-multi-rs-solar-48-6000-100-450-100-2-tracker-pn-pmr482602020","provider":"EdgePower Australia","version":"1.0","type":"link"}